ChemfeCHEMICALS & SOLUTIONSGet in touch ↗
FROM DISCOVERY TO PRODUCTION

Small Pack
Chemicals Supplier.

Delivering high-purity formulations and exact quantities for specialised research and manufacturing.

Explore our chemicals ↗
Laboratory precision Industrial requirements
THE BUILDING BLOCKS
OF WHAT COMES NEXT
01 — ELEMENTS OF POSSIBILITY
CHEMISTRY, CONNECTED.Lab → IndustryOne catalogue. A world of applications.
Explore by applicationResearch & development✳Manufacturing✳Process & formulation✳Quality testing

Commercial Chemicals & Lab Chemicals.
All in one place.

From lab-grade precision to commercial utility,
your complete chemical source.

Solvents

Acetone

CAS 67-64-1

A versatile solvent for laboratory cleaning, extraction and analytical workflows.

Solvents

Isopropyl Alcohol

CAS 67-63-0

A widely used solvent for formulation, surface cleaning and industrial processing.

Bases & alkalis

Sodium Hydroxide

CAS 1310-73-2

An inorganic alkali used in pH adjustment and a range of industrial processes.

Organic acids

Citric Acid

CAS 77-92-9

An organic acid used for acidity adjustment, cleaning and formulation. Application depends on certified grade.

Solvents

Ethanol

CAS 64-17-5

A solvent used in laboratory work and formulation, subject to grade and applicable requirements.

Inorganic salts

Calcium Carbonate

CAS 471-34-1

A mineral filler used in coatings, plastics and other manufacturing applications.

Inorganic salts

Sodium Chloride

CAS 7647-14-5

An inorganic salt used in laboratory preparations and industrial processing.

Solvents

Glycerol

CAS 56-81-5

A humectant and formulation ingredient used in a variety of applications.

Inorganic salts

Sodium Bicarbonate

CAS 144-55-8

A buffering and neutralising compound. Suitability depends on the supplied grade.

Specialty chemicals

Urea

CAS 57-13-6

A nitrogen-containing compound used in agricultural and industrial applications.

Bases & alkalis

Sodium Carbonate

CAS 497-19-8

An alkaline salt used in glass, detergent and textile processing.

Inorganic salts

Potassium Chloride

CAS 7447-40-7

An inorganic salt for laboratory and industrial uses, depending on specification.

Solvents

Methyl methacrylate (MMA)

CAS 80-62-6

Methyl methacrylate (MMA) is a clear, colorless, volatile organic liquid that serves as the primary monomer for making acrylic plastics. Its chemical formula is C₅H₈O₂, and it is widely known for its sharp, fruity odor and high flammability. Key Properties • Physical State: Clear, colorless liquid at room temperature with a boiling point of 101°C and a melting point of -48°C. • Solubility: Slightly soluble in water (about 1.5 g/100 mL at 20°C), though it dissolves easily in most organic solvents like ethanol and acetone. • Reactivity: Polymerizes rapidly when exposed to heat, light, oxygen, or free-radical initiators. Commercial grades contain a small amount of an inhibitor (typically hydroquinone monomethyl ether, MEHQ) to prevent premature polymerization during storage. Major Industrial Applications • Acrylic Sheets & Plastics: Over half of global MMA production goes into making poly(methyl methacrylate) (PMMA), a shatter-resistant, transparent glass alternative sold under brand names like Plexiglas and Lucite. • Surface Coatings & Paints: Used to create durable, weather-resistant acrylic emulsions and resins for architectural paints, automotive finishes, and industrial coatings. • Adhesives & Sealants: Formulated into high-strength structural adhesives used in construction, marine, and aerospace assembly. • Medical & Dental Devices: Used in orthopedic bone cements, dental prosthetics, dentures, and artificial nails. Production Methods • ACH Process (Acetone Cyanohydrin): The traditional route combines acetone and hydrogen cyanide, followed by treatment with sulfuric acid and methanol. • C2 and C4 Routes: Newer, cyanide-free industrial processes synthesize MMA from ethylene (C2) or isobutylene/tert-butanol (C4) to reduce toxic byproducts and waste. Safety and Handling • Flammability: Classified as a Class 3 flammable liquid (flash point around 10°C). Vapors can form explosive mixtures with air and travel along surfaces to ignition sources. • Health Hazards: Liquid and vapor can irritate the skin, eyes, and respiratory tract. Repeated skin contact may cause allergic dermatitis or sensitization. • Storage: Must be stored in cool, well-ventilated areas away from heat, sparks, and oxidizing agents, while maintaining adequate oxygen levels so the added inhibitor remains active.

Solvents

Propylene Glycol

CAS 57-55-6

Propylene glycol (CAS number 57-55-6) is a synthetic, clear, colorless, and nearly odorless viscous liquid widely used as a solvent, humectant, and antifreeze agent. Its chemical formula is C₃H₈O₂, and it is classified as a diol (containing two alcohol groups). Quick Facts & Properties • Chemical Name: Propane-1,2-diol • CAS Number: 57-55-6 • Molecular Formula: C₃H₈O₂ • Molecular Weight: 76.09 g/mol • Physical State: Clear, syrupy, hygroscopic liquid (absorbs moisture from the air) with a faintly sweet taste. • Boiling / Melting Point: Boils at 188.2°C and freezes at -59°C. • Solubility: Completely miscible (mixes in all proportions) with water, acetone, and chloroform. Major Applications • Food & Beverages (E1520): Recognized as safe (GRAS) by the FDA, it acts as a moisture-retaining humectant, solvent for food colorings and flavorings, and stabilizer in baked goods, dairy products, and dressings. • Pharmaceuticals & Cosmetics: Serves as a carrier solvent in oral, injectable, and topical medications, as well as a skin-conditioning agent in lotions, shampoos, and deodorants. • Industrial Polymers: Around 45% of global production is used as a chemical feedstock to manufacture unsaturated polyester resins (used in fiberglass, boats, and pipes) and polyurethanes. • Antifreeze & De-icing: Because it lowers the freezing point of water and has much lower toxicity than ethylene glycol, it is used in non-toxic antifreeze, aircraft de-icing fluids, and food-grade cooling systems. • E-Cigarettes & Theatrical Fog: Vaporized to produce visible mist in vape liquids and stage fog machines. Safety & Toxicity Comparison • Low Acute Toxicity: Unlike ethylene glycol (traditional automotive antifreeze), propylene glycol is rapidly metabolized by the human body into lactic acid and pyruvic acid, making it safe for food and medical grades in standard amounts. • Handling: It is non-flammable at room temperature (flash point around 99°C) and stable under normal storage conditions, though it should be kept tightly sealed to prevent moisture absorption.

Solvents

Acid Slurry 90%

CAS 27176-87-0

Acid Slurry 90% is the standard commercial trade name in India for Linear Alkyl Benzene Sulphonic Acid (LABSA) at 90% active concentration. It is a dark honey-brown, viscous, strongly acidic liquid used as the primary active surfactant in household detergents and industrial cleaners. Quick Facts & Technical Specifications • Chemical Name: Linear Alkyl Benzene Sulphonic Acid (LABSA) • CAS Number: 27176-87-0 (also listed under 85536-14-7 for C10–C13 alkyl derivatives) • Molecular Formula: C₁₈H₃₀O₃S (average, based on dodecylbenzene sulfonic acid) • Molecular Weight: ~326.49 g/mol • Active Matter: 90% minimum (standard commercial grade in India; 96% is also available) • Free Sulfuric Acid: Typically 1.5% – 3.0% (lower free acid produces a lighter color and requires less caustic soda) • Appearance: Honey-brown to dark brown viscous liquid with a pungent sulfur-like odor • pH (1% aqueous solution): < 2 (strongly acidic and corrosive) • Solubility: Completely soluble in water with heat generation (exothermic dilution) Major Applications • Detergent Powders & Cakes: Neutralized with soda ash (sodium carbonate) to form Sodium Linear Alkyl Benzene Sulfonate (LAS), the main stain- and grease-fighting ingredient in laundry powders and detergent bars. • Liquid Detergents & Dishwash: Neutralized with caustic soda (sodium hydroxide) or triethanolamine (TEA) to achieve a neutral pH (7–8) for liquid laundry detergents, dishwashing gels, and floor cleaners. • Industrial Cleaners & Emulsifiers: Used in heavy-duty metal degreasers, car wash shampoos, and as an emulsifier in agricultural pesticide formulations. Handling & Neutralization Notes • Neutralization Requirement: Raw LABSA is too acidic to use directly in household cleaners and must be neutralized with an alkali (such as NaOH or soda ash) before adding perfumes, colors, or other surfactants. • Corrosivity: It corrodes mild steel and aluminum; store it in HDPE drums, fiberglass (FRP), or stainless steel (SS 316) tanks. • Safety: Causes severe skin and eye burns on contact. Always wear acid-resistant gloves, splash goggles, and protective aprons when handling or diluting.

Solvents

Titanium isopropoxide

CAS 546-68-9

Titanium isopropoxide (often abbreviated as TTIP or TIPT) is a colorless to pale yellow liquid organometallic compound with the chemical formula Ti{OCH(CH₃)₂}₄ and CAS number 546-68-9. It is widely used as a precursor for titanium dioxide (TiO₂) nanomaterials and as a catalyst in organic synthesis and polymer production. Quick Facts & Properties • Chemical Name: Titanium(IV) isopropoxide (also called Tetraisopropyl orthotitanate) • CAS Number: 546-68-9 • Molecular Formula: C₁₂H₂₈O₄Ti • Molecular Weight: 284.22 g/mol • Appearance: Colorless to pale yellow liquid with an alcohol-like (isopropanol) odor • Boiling / Melting Point: Boils at 232°C and melts around 14–17°C (may solidify in cool storage) • Density: ~0.96 g/cm³ at 20°C • Reactivity: Reacts vigorously with water (hydrolyzes rapidly) to form titanium dioxide (TiO₂) and isopropyl alcohol. Soluble in anhydrous organic solvents like ethanol, isopropanol, toluene, and hexane. Major Applications • Sol-Gel & Nanomaterials: The primary precursor for synthesizing titanium dioxide (TiO₂) thin films, nanoparticles, photocatalysts, and aerogels via sol-gel hydrolysis. • Polymerization Catalyst: Serves as a Ziegler–Natta co-catalyst and transesterification catalyst in the production of polyesters (such as PET), polyolefins, and silicones. • Organic Synthesis: Used as a Lewis acid catalyst in reactions like the Sharpless asymmetric epoxidation of allylic alcohols and esterification processes. • Surface Coatings & Glass: Applied in chemical vapor deposition (CVD) and dip-coating to create scratch-resistant, anti-reflective, or self-cleaning coatings on glass, ceramics, and metals. Safety & Storage Guidelines • Moisture Sensitivity: Must be stored under a dry, inert atmosphere (nitrogen or argon) in tightly sealed containers. Exposure to humid air causes immediate hydrolysis, forming white TiO₂ precipitates and releasing flammable isopropanol vapor. • Flammability: Classified as a flammable liquid (flash point around 22°C – 45°C, depending on purity and free isopropanol content). Keep away from heat, sparks, and open flames. • Health Hazards: Causes eye and skin irritation; vapors can irritate the respiratory tract. Handle in a fume hood with chemical-resistant gloves and splash goggles.

Solvents

Tetra n-butyl titanate

CAS 5593-70-4

Tetra n-butyl titanate (TNBT) is a high-purity, reactive organometallic titanium alkoxide (CAS 5593-70-4) supplied as a clear, colorless to pale yellow liquid. It functions primarily as a non-toxic, heavy-metal-free esterification catalyst, a cross-linking agent for polymers and silicones, and a precursor for titanium dioxide (TiO₂) surface coatings. Typical Technical Specifications • Chemical Name: Tetra n-butyl orthotitanate / Titanium(IV) n-butoxide • CAS Number: 5593-70-4 • EINECS / EC Number: 227-006-8 • Molecular Formula: C₁₆H₃₆O₄Ti • Molecular Weight: 340.32 g/mol • Purity / Assay: ≥ 98.0% – 99.0% • Titanium (Ti) Content: ~13.8% – 14.2% (as TiO₂: ~23.0% – 23.7%) • Appearance: Clear, colorless to pale yellow liquid • Specific Gravity (at 20°C): 0.995 – 1.005 g/cm³ • Viscosity (at 25°C): ~60 – 75 mPa·s (cP) • Flash Point: ~47°C – 55°C (Closed Cup) • Freezing / Pour Point: < -55°C Key Performance Benefits • High Catalytic Efficiency: Replaces tin, antimony, and lead catalysts in esterification and transesterification reactions without leaving heavy-metal residues. • Controlled Reactivity: Hydrolyzes more slowly than titanium isopropoxide (TTIP), offering better pot life and smoother film formation in paints, inks, and coatings. • Superior Adhesion & Heat Resistance: Forms a durable TiO₂ network upon curing that improves adhesion on glass, metals, and plastics while resisting temperatures up to 500°C+. • Low Pour Point: Remains a free-flowing liquid even in sub-zero storage conditions, preventing crystallization issues during transport. Primary End-Use Industries • Polymers & Resins: Catalyst for PET, PBT, unsaturated polyesters, and phthalate/non-phthalate plasticizers (DOP, DOTP, TOTM). • Paints, Inks & Coatings: Adhesion promoter in flexographic/gravure printing inks and binder in heat-resistant anti-corrosion coatings. • Silicone & Sealants: Cross-linking catalyst for neutral-cure RTV silicone sealants and elastomers. • Glass & Ceramics: Surface treatment to improve scratch resistance, hydrophobicity, and optical reflectivity. Standard Packaging & Storage • Packaging: Supplied in moisture-tight 200 kg MS/HDPE-lined drums, 25 kg/50 kg carboys, or 1,000 kg IBC totes blanketed under dry nitrogen. • Shelf Life: 12 months from manufacturing date when stored unopened in a cool, dry, well-ventilated area away from moisture and ignition sources.

Solvents

Silicone Oil 350

CAS 63148-62-9

Silicone Oil 350 (most commonly Polydimethylsiloxane, PDMS, 350 cSt) is a clear, colorless, odorless, and chemically inert linear silicone fluid with a kinematic viscosity of 350 centistokes (cSt) at 25°C. Its CAS number is 63148-62-9, and it is one of the most widely used general-purpose silicone fluid grades across industrial, cosmetic, and medical applications. • Chemical Name: Polydimethylsiloxane (PDMS) / Dimethicone 350 • CAS Number: 63148-62-9 • Viscosity (at 25°C): 350 cSt (mm²/s) — medium viscosity, roughly comparable to light motor oil or thin syrup • Appearance: Crystal-clear, colorless, odorless, non-greasy oily liquid • Specific Gravity (at 25°C): ~0.965 – 0.972 g/cm³ • Refractive Index (at 25°C): ~1.4030 – 1.4035 • Flash Point: > 300°C (Open Cup) — non-flammable under normal operating conditions • Pour Point: -50°C (remains fluid across a wide temperature range from -40°C to +200°C) • Solubility: Insoluble in water and methanol; soluble in aliphatic/aromatic hydrocarbons (toluene, xylene, hexane) and chlorinated solvents. Key Performance Properties • High Thermal Stability: Resists breakdown and oxidation at continuous operating temperatures up to 180°C – 200°C without gumming or carbonizing. • Low Surface Tension: Spreads easily (~21.1 mN/m) to provide superior wetting, lubrication, and water repellency. • High Dielectric Strength: Acts as an excellent electrical insulator (~14–16 kV/mm) with low dissipation factor. • Flat Viscosity-Temperature Slope: Maintains consistent viscosity across extreme heat and cold compared to mineral oils. Major Applications • Mold Release Agent: Used in rubber, plastic, polyurethane, and foundry molding to prevent sticking and deliver a glossy surface finish. • Lubricant & Damping Fluid: Lubricates plastic-on-plastic, rubber-on-metal, and treadmill belts; also used as a damping fluid in precision instruments and gauges. • Personal Care & Cosmetics (Dimethicone 350): Imparts a silky, smooth feel and shine in hair serums, conditioners, skin lotions, and barrier creams without clogging pores. • Antifoam & Defoamer Base: Formulated with hydrophobic silica to control foam in industrial processing, textiles, and wastewater treatment. • Polishes & Car Care: Key gloss-enhancing and water-beading ingredient in automotive dashboard polishes, tire dressings, and furniture polishes. • Textile Finishing: Softens fabrics and improves thread lubricity during high-speed sewing. Standard Packaging & Storage • Packaging: Commonly supplied in 50 kg HDPE carboys, 200 kg MS/HDPE drums, and 1,000 kg IBC totes (popular brands in India include Wacker AK 350, Dow Xiameter PMX-200 350 cSt, Elkem Bluesil, and Momentive). • Shelf Life: 24 to 36 months when stored in tightly sealed containers away from strong acids, alkalis, and direct sunlight.

Solvents

Ethyl Silicate 40%

CAS 11099-06-2

Ethyl Silicate 40% (also known as Poly(diethoxysiloxane) or Ethyl Polysilicate 40) is a clear, colorless to pale yellow liquid consisting of partially hydrolyzed and condensed ethyl silicate oligomers with an available silica (SiO₂) content of 40% to 42% by weight. Its CAS number is 11099-06-2 (sometimes also referenced under Tetraethyl orthosilicate monomer CAS 78-10-4), and it serves as a high-performance inorganic binder, cross-linker, and silica precursor. Quick Facts & Technical Specifications • Chemical Name: Ethyl Polysilicate / Poly(diethoxysiloxane) • CAS Number: 11099-06-2 • Silica (SiO₂) Content: 40.0% – 42.0% by weight (compared to ~28% in monomeric Tetraethyl Orthosilicate, TEOS) • Appearance: Clear, colorless to faint yellow liquid with a mild ester/ethanol-like odor • Specific Gravity (at 20°C): ~1.05 – 1.07 g/cm³ • Viscosity (at 25°C): ~4.0 – 5.0 mPa·s (cP) • Flash Point: ~45°C – 52°C (Closed Cup) — combustible/flammable liquid • Acidity (as HCl): ≤ 0.005% – 0.01% (low acidity ensures predictable shelf life and controlled hydrolysis) • Solubility: Insoluble in water (reacts via hydrolysis); miscible with alcohols (ethanol, isopropanol), ketones, esters, and aromatic hydrocarbons. How It Works Unlike monomeric Tetraethyl Orthosilicate (TEOS, 28% SiO₂), Ethyl Silicate 40% is already partially polymerized into short siloxane chains (average ~5 silicon atoms per molecule). When mixed with water and an acid or base catalyst, it undergoes controlled hydrolysis and condensation to release ethanol and form a dense, heat-resistant amorphous silica (SiO₂) network. Major Industrial Applications • Anti-Corrosion Zinc-Rich Primers: The primary binder in heavy-duty inorganic zinc-rich (IOZ) coatings for marine vessels, bridges, offshore oil rigs, and structural steel. It cures into a rock-hard silica matrix that provides galvanic corrosion protection and resists temperatures above 400°C. • Precision Investment Casting: Used as a high-strength ceramic shell binder (slurry) in lost-wax investment casting for aerospace turbine blades, automotive parts, and industrial valves. • Refractories & Ceramics: Acts as a zero-fluxing, high-purity binder for refractory bricks, ceramic fibers, and foundry molds capable of withstanding extreme temperatures (>1,500°C). • Silicone Elastomers & Sealants: Functions as a cross-linking agent in two-part RTV (room-temperature vulcanizing) condensation-cure silicone rubbers. • Stone & Masonry Consolidation: Penetrates porous sandstone, limestone, and historical monuments to deposit strengthening silica gel without blocking vapor permeability. Comparison: Ethyl Silicate 40% vs. TEOS (Ethyl Silicate 28%) • Higher Silica Yield: Delivers ~40% SiO₂ compared to ~28% SiO₂ in pure TEOS, meaning lower solvent emission and stronger binding per kilogram. • Lower Volatility & Higher Flash Point: Safer to handle and store than monomeric TEOS (flash point ~48°C vs. ~37°C for TEOS). • Cost Efficiency: More economical per unit of active silica for coatings, foundry, and refractory applications. Storage & Handling Guidelines • Moisture Sensitivity: Keep drums tightly sealed under dry air or nitrogen. Moisture ingress causes gradual viscosity increase and eventual gelation. • Safety: Flammable liquid and vapor; causes eye and mild respiratory irritation. Use in well-ventilated areas away from sparks or open flames, wearing chemical splash goggles and nitrile gloves. • Packaging: Commonly supplied in 200 kg / 210 kg MS or HDPE-lined drums and 1,000 kg IBC totes (major brands in India include Wacker TES 40 WN, Evonik Dynasylan 40, Momentive Silbond 40, and domestic manufacturers in Gujarat/Maharashtra).

Solvents

Acetyl Acetone

CAS 123-54-6

Acetylacetone (also known as 2,4-Pentanedione or AcAc) is a clear, colorless to pale yellow liquid organic compound with the chemical formula C₅H₈O₂ and CAS number 123-54-6. It is the simplest beta-diketone and is widely used as a chelating ligand for metal catalysts, a pharmaceutical intermediate, and a stabilizer in polymers and coatings. Quick Facts & Technical Specifications • Chemical Name: Acetylacetone / Pentane-2,4-dione • CAS Number: 123-54-6 • Molecular Formula: C₅H₈O₂ (CH₃COCH₂COCH₃) • Molecular Weight: 100.12 g/mol • Appearance: Clear, colorless to slightly yellowish liquid with a pleasant, sweet, ketone-like odor • Boiling / Melting Point: Boils at 140.4°C and freezes at -23°C • Specific Gravity (at 20°C): ~0.972 – 0.976 g/cm³ • Flash Point: 34°C (Closed Cup) — Class 3 flammable liquid • Solubility: Soluble in water (~16 g/100 mL at 20°C) and completely miscible with common organic solvents (ethanol, acetone, chloroform, ether, and benzene). Key Chemical Feature: Keto–Enol Tautomerism Acetylacetone naturally exists as an equilibrium mixture of two forms—keto and enol (typically ~80% enol in pure liquid form). Because the enol form easily loses a proton, acetylacetone acts as a powerful bidentate chelating ligand, binding tightly to transition metals (such as titanium, zirconium, aluminum, iron, and cobalt) to form stable metal acetylacetonates. Major Industrial Applications • Metal Acetylacetonate Catalysts: Used to manufacture metal chelates (like titanium acetylacetonate, zirconium acetylacetonate, and cobalt acetylacetonate) that serve as polymerization catalysts, paint driers, and cross-linking agents in inks and coatings. • Pharmaceuticals & Agrochemicals: A key building block for synthesizing heterocyclic compounds, including sulfamethazine, vitamin B6 (pyridoxine), and various fungicides and herbicides. • PVC Heat Stabilizers: Acts as an organic co-stabilizer (alongside calcium/zinc systems) in flexible and rigid PVC to prevent discoloration and thermal degradation during processing. • Paints, Inks & Adhesives: Functions as a chelating retarder/stabilizer in titanium- and zirconium-crosslinked flexographic printing inks and sol-gel coatings to extend pot life and prevent premature gelation. • Metal Extraction & Surface Treatment: Used in hydrometallurgy to extract metal ions and in corrosion-inhibiting metal surface treatments. Safety & Storage Guidelines • Flammability: Flammable liquid and vapor (flash point 34°C). Keep away from heat, sparks, open flames, and static discharge. • Health Hazards: Harmful if swallowed, inhaled, or absorbed through the skin; vapors can cause dizziness, headache, and eye/respiratory irritation. Handle in well-ventilated areas using chemical-resistant gloves (butyl rubber or Viton) and splash goggles. • Storage: Store in tightly closed containers in a cool, dry, well-ventilated place away from strong oxidizing agents and strong bases. Standard industrial packaging is 200 kg HDPE or epoxy-lined MS drums.

Solvents

Light Liquid Paraffin (LLP)

CAS 8042-47-5

Light Liquid Paraffin (LLP) is a highly refined, colorless, odorless, and tasteless mineral oil derived from petroleum. Its CAS number is 8042-47-5 (also listed under 8012-95-1), and it consists of a purified mixture of liquid saturated hydrocarbons (mainly C₁₅ to C₄₀ alkanes and cycloalkanes). Compared to Heavy Liquid Paraffin (HLP), LLP has a lower viscosity and lower density, making it lighter, faster-spreading, and non-greasy on the skin. Quick Facts & Technical Specifications • Chemical / INCI Name: Paraffinum Liquidum / Mineral Oil (Light) • CAS Number: 8042-47-5 / 8012-95-1 • Appearance: Crystal-clear, water-white, transparent oily liquid (free from fluorescence in daylight) • Odor & Taste: Completely odorless and tasteless • Kinematic Viscosity (at 40°C): Typically 12 – 22 cSt (varies slightly by IP/BP/USP grade; Heavy Liquid Paraffin is typically >60–70 cSt) • Specific Gravity / Density (at 20°C–25°C): 0.818 – 0.880 g/cm³ (typically ~0.830 – 0.855 g/cm³ for commercial LLP) • Flash Point: > 160°C – 180°C (Open Cup) — non-flammable at room temperature • Pour Point: -10°C to -18°C • Solubility: Insoluble in water and ethanol; miscible with volatile oils, fixed oils (except castor oil), chloroform, ether, and hydrocarbon solvents. Major Grades & Standards • Pharma / Cosmetic Grade (IP / BP / USP): Ultra-pure, free from polycyclic aromatic hydrocarbons (PAHs) and sulfur compounds, meeting Indian Pharmacopoeia (IP), British Pharmacopoeia (BP), or USP standards. • Food Grade (NSF H1 / FDA 21 CFR 172.878): Approved for incidental food contact, food processing machinery lubrication, and protective coatings on fruits/vegetables. • Technical / Industrial Grade: Used in non-contact industrial manufacturing where pharmacopoeial certification is not required. Major Applications • Personal Care & Cosmetics: The primary emollient and carrier base in baby oils, hair oils (such as non-sticky hair oils), skin lotions, cold creams, makeup removers, and lip balms. • Pharmaceuticals: Used as an emollient base in topical ointments, ear drops, and capsule lubrication (note: Heavy Liquid Paraffin is more commonly used as an oral laxative to prevent leakage). • Textiles & Spin Finishes: Acts as a coning oil and fiber lubricant in synthetic yarn spinning, knitting, and weaving to reduce friction and static. • Plastics & Polymers: Serves as an internal/external lubricant, plasticizer, and mold release agent in PVC, polystyrene, and thermoplastic elastomers. • Agriculture & Pest Control: Used as a horticultural spray oil and carrier solvent in mosquito coils, aerosol insecticides, and agricultural adjuvants. • Perfumery & Incense (Agarbatti): Used as a low-odor, non-volatile carrier/diluent for fragrance compounds and dip-perfumed incense sticks. Storage & Handling • Packaging: Commonly supplied in 210 Liter (175–180 kg) MS/HDPE drums, 50 Liter carboys, and bulk tankers (major producers in India include Savita Oil Technologies, Gandhar Oil Refinery, Raj Petro Specialties, and Panama Petrochem). • Storage: Store in tightly closed containers in a cool, dry place away from direct sunlight and strong oxidizing agents. Shelf life is typically 24 to 36 months.

Browse by industry

Explore categories and industries

About our catalogue

Browse our comprehensive catalog to explore detailed product specifications and applications all in one place. Please verify your required chemical grade, Certificate of Analysis (COA), and Safety Data Sheet (SDS) prior to selection, and check your estimated delivery timeline before checkout since express shipping is limited to select locations.

Product enquiries

Contact Ravi · +91 9004297844