ChemfeSearch products

Home / Browse chemicals

Paints & coatings chemicals

Which products are listed?

The following products are assigned to Paints & coatings in our catalogue. Open each product for its identity, listed specifications and application details. A listing does not confirm suitability for your process.

Acetone

CAS 67-64-1 · Laboratory / Commercial

Acetone (CAS 67-64-1), also called propanone, is a fast-evaporating, flammable solvent used in laboratories and in the manufacture of paints, coatings and cleaning products. Choose a grade that meets the requirements of your test method or manufacturing process.

Glycerol

CAS 56-81-5 · Commercial

A humectant and formulation ingredient used in a variety of applications.

Tetra n-butyl titanate

CAS 5593-70-4 · Laboratory / Commercial

Tetra n-butyl titanate (TNBT) is a high-purity, reactive organometallic titanium alkoxide (CAS 5593-70-4) supplied as a clear, colorless to pale yellow liquid. It functions primarily as a non-toxic, heavy-metal-free esterification catalyst, a cross-linking agent for polymers and silicones, and a precursor for titanium dioxide (TiO₂) surface coatings. Typical Technical Specifications • Chemical Name: Tetra n-butyl orthotitanate / Titanium(IV) n-butoxide • CAS Number: 5593-70-4 • EINECS / EC Number: 227-006-8 • Molecular Formula: C₁₆H₃₆O₄Ti • Molecular Weight: 340.32 g/mol • Purity / Assay: ≥ 98.0% – 99.0% • Titanium (Ti) Content: ~13.8% – 14.2% (as TiO₂: ~23.0% – 23.7%) • Appearance: Clear, colorless to pale yellow liquid • Specific Gravity (at 20°C): 0.995 – 1.005 g/cm³ • Viscosity (at 25°C): ~60 – 75 mPa·s (cP) • Flash Point: ~47°C – 55°C (Closed Cup) • Freezing / Pour Point: < -55°C Key Performance Benefits • High Catalytic Efficiency: Replaces tin, antimony, and lead catalysts in esterification and transesterification reactions without leaving heavy-metal residues. • Controlled Reactivity: Hydrolyzes more slowly than titanium isopropoxide (TTIP), offering better pot life and smoother film formation in paints, inks, and coatings. • Superior Adhesion & Heat Resistance: Forms a durable TiO₂ network upon curing that improves adhesion on glass, metals, and plastics while resisting temperatures up to 500°C+. • Low Pour Point: Remains a free-flowing liquid even in sub-zero storage conditions, preventing crystallization issues during transport. Primary End-Use Industries • Polymers & Resins: Catalyst for PET, PBT, unsaturated polyesters, and phthalate/non-phthalate plasticizers (DOP, DOTP, TOTM). • Paints, Inks & Coatings: Adhesion promoter in flexographic/gravure printing inks and binder in heat-resistant anti-corrosion coatings. • Silicone & Sealants: Cross-linking catalyst for neutral-cure RTV silicone sealants and elastomers. • Glass & Ceramics: Surface treatment to improve scratch resistance, hydrophobicity, and optical reflectivity. Standard Packaging & Storage • Packaging: Supplied in moisture-tight 200 kg MS/HDPE-lined drums, 25 kg/50 kg carboys, or 1,000 kg IBC totes blanketed under dry nitrogen. • Shelf Life: 12 months from manufacturing date when stored unopened in a cool, dry, well-ventilated area away from moisture and ignition sources.

Silicone Oil 350

CAS 63148-62-9 · Laboratory / Commercial

Silicone Oil 350 (most commonly Polydimethylsiloxane, PDMS, 350 cSt) is a clear, colorless, odorless, and chemically inert linear silicone fluid with a kinematic viscosity of 350 centistokes (cSt) at 25°C. Its CAS number is 63148-62-9, and it is one of the most widely used general-purpose silicone fluid grades across industrial, cosmetic, and medical applications. • Chemical Name: Polydimethylsiloxane (PDMS) / Dimethicone 350 • CAS Number: 63148-62-9 • Viscosity (at 25°C): 350 cSt (mm²/s) — medium viscosity, roughly comparable to light motor oil or thin syrup • Appearance: Crystal-clear, colorless, odorless, non-greasy oily liquid • Specific Gravity (at 25°C): ~0.965 – 0.972 g/cm³ • Refractive Index (at 25°C): ~1.4030 – 1.4035 • Flash Point: > 300°C (Open Cup) — non-flammable under normal operating conditions • Pour Point: -50°C (remains fluid across a wide temperature range from -40°C to +200°C) • Solubility: Insoluble in water and methanol; soluble in aliphatic/aromatic hydrocarbons (toluene, xylene, hexane) and chlorinated solvents. Key Performance Properties • High Thermal Stability: Resists breakdown and oxidation at continuous operating temperatures up to 180°C – 200°C without gumming or carbonizing. • Low Surface Tension: Spreads easily (~21.1 mN/m) to provide superior wetting, lubrication, and water repellency. • High Dielectric Strength: Acts as an excellent electrical insulator (~14–16 kV/mm) with low dissipation factor. • Flat Viscosity-Temperature Slope: Maintains consistent viscosity across extreme heat and cold compared to mineral oils. Major Applications • Mold Release Agent: Used in rubber, plastic, polyurethane, and foundry molding to prevent sticking and deliver a glossy surface finish. • Lubricant & Damping Fluid: Lubricates plastic-on-plastic, rubber-on-metal, and treadmill belts; also used as a damping fluid in precision instruments and gauges. • Personal Care & Cosmetics (Dimethicone 350): Imparts a silky, smooth feel and shine in hair serums, conditioners, skin lotions, and barrier creams without clogging pores. • Antifoam & Defoamer Base: Formulated with hydrophobic silica to control foam in industrial processing, textiles, and wastewater treatment. • Polishes & Car Care: Key gloss-enhancing and water-beading ingredient in automotive dashboard polishes, tire dressings, and furniture polishes. • Textile Finishing: Softens fabrics and improves thread lubricity during high-speed sewing. Standard Packaging & Storage • Packaging: Commonly supplied in 50 kg HDPE carboys, 200 kg MS/HDPE drums, and 1,000 kg IBC totes (popular brands in India include Wacker AK 350, Dow Xiameter PMX-200 350 cSt, Elkem Bluesil, and Momentive). • Shelf Life: 24 to 36 months when stored in tightly sealed containers away from strong acids, alkalis, and direct sunlight.

Ethyl Silicate 40%

CAS 11099-06-2 · Laboratory / Commercial

Ethyl Silicate 40% (also known as Poly(diethoxysiloxane) or Ethyl Polysilicate 40) is a clear, colorless to pale yellow liquid consisting of partially hydrolyzed and condensed ethyl silicate oligomers with an available silica (SiO₂) content of 40% to 42% by weight. Its CAS number is 11099-06-2 (sometimes also referenced under Tetraethyl orthosilicate monomer CAS 78-10-4), and it serves as a high-performance inorganic binder, cross-linker, and silica precursor. Quick Facts & Technical Specifications • Chemical Name: Ethyl Polysilicate / Poly(diethoxysiloxane) • CAS Number: 11099-06-2 • Silica (SiO₂) Content: 40.0% – 42.0% by weight (compared to ~28% in monomeric Tetraethyl Orthosilicate, TEOS) • Appearance: Clear, colorless to faint yellow liquid with a mild ester/ethanol-like odor • Specific Gravity (at 20°C): ~1.05 – 1.07 g/cm³ • Viscosity (at 25°C): ~4.0 – 5.0 mPa·s (cP) • Flash Point: ~45°C – 52°C (Closed Cup) — combustible/flammable liquid • Acidity (as HCl): ≤ 0.005% – 0.01% (low acidity ensures predictable shelf life and controlled hydrolysis) • Solubility: Insoluble in water (reacts via hydrolysis); miscible with alcohols (ethanol, isopropanol), ketones, esters, and aromatic hydrocarbons. How It Works Unlike monomeric Tetraethyl Orthosilicate (TEOS, 28% SiO₂), Ethyl Silicate 40% is already partially polymerized into short siloxane chains (average ~5 silicon atoms per molecule). When mixed with water and an acid or base catalyst, it undergoes controlled hydrolysis and condensation to release ethanol and form a dense, heat-resistant amorphous silica (SiO₂) network. Major Industrial Applications • Anti-Corrosion Zinc-Rich Primers: The primary binder in heavy-duty inorganic zinc-rich (IOZ) coatings for marine vessels, bridges, offshore oil rigs, and structural steel. It cures into a rock-hard silica matrix that provides galvanic corrosion protection and resists temperatures above 400°C. • Precision Investment Casting: Used as a high-strength ceramic shell binder (slurry) in lost-wax investment casting for aerospace turbine blades, automotive parts, and industrial valves. • Refractories & Ceramics: Acts as a zero-fluxing, high-purity binder for refractory bricks, ceramic fibers, and foundry molds capable of withstanding extreme temperatures (>1,500°C). • Silicone Elastomers & Sealants: Functions as a cross-linking agent in two-part RTV (room-temperature vulcanizing) condensation-cure silicone rubbers. • Stone & Masonry Consolidation: Penetrates porous sandstone, limestone, and historical monuments to deposit strengthening silica gel without blocking vapor permeability. Comparison: Ethyl Silicate 40% vs. TEOS (Ethyl Silicate 28%) • Higher Silica Yield: Delivers ~40% SiO₂ compared to ~28% SiO₂ in pure TEOS, meaning lower solvent emission and stronger binding per kilogram. • Lower Volatility & Higher Flash Point: Safer to handle and store than monomeric TEOS (flash point ~48°C vs. ~37°C for TEOS). • Cost Efficiency: More economical per unit of active silica for coatings, foundry, and refractory applications. Storage & Handling Guidelines • Moisture Sensitivity: Keep drums tightly sealed under dry air or nitrogen. Moisture ingress causes gradual viscosity increase and eventual gelation. • Safety: Flammable liquid and vapor; causes eye and mild respiratory irritation. Use in well-ventilated areas away from sparks or open flames, wearing chemical splash goggles and nitrile gloves. • Packaging: Commonly supplied in 200 kg / 210 kg MS or HDPE-lined drums and 1,000 kg IBC totes (major brands in India include Wacker TES 40 WN, Evonik Dynasylan 40, Momentive Silbond 40, and domestic manufacturers in Gujarat/Maharashtra).

Acetyl Acetone

CAS 123-54-6 · Laboratory / Commercial

Acetylacetone (also known as 2,4-Pentanedione or AcAc) is a clear, colorless to pale yellow liquid organic compound with the chemical formula C₅H₈O₂ and CAS number 123-54-6. It is the simplest beta-diketone and is widely used as a chelating ligand for metal catalysts, a pharmaceutical intermediate, and a stabilizer in polymers and coatings. Quick Facts & Technical Specifications • Chemical Name: Acetylacetone / Pentane-2,4-dione • CAS Number: 123-54-6 • Molecular Formula: C₅H₈O₂ (CH₃COCH₂COCH₃) • Molecular Weight: 100.12 g/mol • Appearance: Clear, colorless to slightly yellowish liquid with a pleasant, sweet, ketone-like odor • Boiling / Melting Point: Boils at 140.4°C and freezes at -23°C • Specific Gravity (at 20°C): ~0.972 – 0.976 g/cm³ • Flash Point: 34°C (Closed Cup) — Class 3 flammable liquid • Solubility: Soluble in water (~16 g/100 mL at 20°C) and completely miscible with common organic solvents (ethanol, acetone, chloroform, ether, and benzene). Key Chemical Feature: Keto–Enol Tautomerism Acetylacetone naturally exists as an equilibrium mixture of two forms—keto and enol (typically ~80% enol in pure liquid form). Because the enol form easily loses a proton, acetylacetone acts as a powerful bidentate chelating ligand, binding tightly to transition metals (such as titanium, zirconium, aluminum, iron, and cobalt) to form stable metal acetylacetonates. Major Industrial Applications • Metal Acetylacetonate Catalysts: Used to manufacture metal chelates (like titanium acetylacetonate, zirconium acetylacetonate, and cobalt acetylacetonate) that serve as polymerization catalysts, paint driers, and cross-linking agents in inks and coatings. • Pharmaceuticals & Agrochemicals: A key building block for synthesizing heterocyclic compounds, including sulfamethazine, vitamin B6 (pyridoxine), and various fungicides and herbicides. • PVC Heat Stabilizers: Acts as an organic co-stabilizer (alongside calcium/zinc systems) in flexible and rigid PVC to prevent discoloration and thermal degradation during processing. • Paints, Inks & Adhesives: Functions as a chelating retarder/stabilizer in titanium- and zirconium-crosslinked flexographic printing inks and sol-gel coatings to extend pot life and prevent premature gelation. • Metal Extraction & Surface Treatment: Used in hydrometallurgy to extract metal ions and in corrosion-inhibiting metal surface treatments. Safety & Storage Guidelines • Flammability: Flammable liquid and vapor (flash point 34°C). Keep away from heat, sparks, open flames, and static discharge. • Health Hazards: Harmful if swallowed, inhaled, or absorbed through the skin; vapors can cause dizziness, headache, and eye/respiratory irritation. Handle in well-ventilated areas using chemical-resistant gloves (butyl rubber or Viton) and splash goggles. • Storage: Store in tightly closed containers in a cool, dry, well-ventilated place away from strong oxidizing agents and strong bases. Standard industrial packaging is 200 kg HDPE or epoxy-lined MS drums.

Light Liquid Paraffin (LLP)

CAS 8042-47-5 · Laboratory / Commercial

Light Liquid Paraffin (LLP) is a highly refined, colorless, odorless, and tasteless mineral oil derived from petroleum. Its CAS number is 8042-47-5 (also listed under 8012-95-1), and it consists of a purified mixture of liquid saturated hydrocarbons (mainly C₁₅ to C₄₀ alkanes and cycloalkanes). Compared to Heavy Liquid Paraffin (HLP), LLP has a lower viscosity and lower density, making it lighter, faster-spreading, and non-greasy on the skin. Quick Facts & Technical Specifications • Chemical / INCI Name: Paraffinum Liquidum / Mineral Oil (Light) • CAS Number: 8042-47-5 / 8012-95-1 • Appearance: Crystal-clear, water-white, transparent oily liquid (free from fluorescence in daylight) • Odor & Taste: Completely odorless and tasteless • Kinematic Viscosity (at 40°C): Typically 12 – 22 cSt (varies slightly by IP/BP/USP grade; Heavy Liquid Paraffin is typically >60–70 cSt) • Specific Gravity / Density (at 20°C–25°C): 0.818 – 0.880 g/cm³ (typically ~0.830 – 0.855 g/cm³ for commercial LLP) • Flash Point: > 160°C – 180°C (Open Cup) — non-flammable at room temperature • Pour Point: -10°C to -18°C • Solubility: Insoluble in water and ethanol; miscible with volatile oils, fixed oils (except castor oil), chloroform, ether, and hydrocarbon solvents. Major Grades & Standards • Pharma / Cosmetic Grade (IP / BP / USP): Ultra-pure, free from polycyclic aromatic hydrocarbons (PAHs) and sulfur compounds, meeting Indian Pharmacopoeia (IP), British Pharmacopoeia (BP), or USP standards. • Food Grade (NSF H1 / FDA 21 CFR 172.878): Approved for incidental food contact, food processing machinery lubrication, and protective coatings on fruits/vegetables. • Technical / Industrial Grade: Used in non-contact industrial manufacturing where pharmacopoeial certification is not required. Major Applications • Personal Care & Cosmetics: The primary emollient and carrier base in baby oils, hair oils (such as non-sticky hair oils), skin lotions, cold creams, makeup removers, and lip balms. • Pharmaceuticals: Used as an emollient base in topical ointments, ear drops, and capsule lubrication (note: Heavy Liquid Paraffin is more commonly used as an oral laxative to prevent leakage). • Textiles & Spin Finishes: Acts as a coning oil and fiber lubricant in synthetic yarn spinning, knitting, and weaving to reduce friction and static. • Plastics & Polymers: Serves as an internal/external lubricant, plasticizer, and mold release agent in PVC, polystyrene, and thermoplastic elastomers. • Agriculture & Pest Control: Used as a horticultural spray oil and carrier solvent in mosquito coils, aerosol insecticides, and agricultural adjuvants. • Perfumery & Incense (Agarbatti): Used as a low-odor, non-volatile carrier/diluent for fragrance compounds and dip-perfumed incense sticks. Storage & Handling • Packaging: Commonly supplied in 210 Liter (175–180 kg) MS/HDPE drums, 50 Liter carboys, and bulk tankers (major producers in India include Savita Oil Technologies, Gandhar Oil Refinery, Raj Petro Specialties, and Panama Petrochem). • Storage: Store in tightly closed containers in a cool, dry place away from direct sunlight and strong oxidizing agents. Shelf life is typically 24 to 36 months.

What should I confirm before ordering?

Tell us your application, required grade, purity, quantity and packaging. Ask for the current safety data sheet and a batch-specific certificate of analysis, and confirm any regulatory requirements with your qualified technical team.

Contact Ravi for product enquiries